• “Seller” means Banjo Corporation or KZValve, LLC or any of their affiliates.

• The Equipment shall transfer by Seller to the shipping carrier per the Incoterms 2020 set forth in the applicable quotation (“Quote”) or FCA, Seller’s location if not otherwise specified, at which point title and all risk of loss or damage to Equipment will pass to Buyer.
• Buyer shall conduct an inspection of the Products promptly upon delivery and shall promptly notify Seller in writing of any defects. If Buyer fails to promptly notify Seller of any defects, whether or not any such inspection and acceptance has been performed by Buyer, the Products shall be considered accepted. Buyer’s sole and exclusive remedy for rejection of Equipment is as set forth in Section 3 (Product Warranty).
• Minimum order value required is $250.00 USD.
• Products must be ordered in prescribed minimum lot quantities where required by the Seller. Failure to order in specified lot quantities will result in order delays and possible order rejections/cancelations.
• All order submissions must clearly identify all products by the Seller’s catalog part numbers.
• A drop shipment fee will be applied to all drop shipments: 10% of invoice value when Seller is Banjo Corporation or $20 per shipment when Seller is KZValve, LLC.
• Lead times are calculated from the date the order is entered by Seller.
• Standard and non-standard lead times/shipment dates are estimates only and may vary based on market seasonality, spike order volumes, and other factors.
• Multiple shipments against a single order shall be treated as single orders with regards to freight terms.
• A fee equal to 5% the value of the total order will be added for credit card purchases.

All technical support installation, product warranty, and post warranty services are provided only at the original installed location. Product warranty is NONTRANSFERABLE from one location to another, except with the prior written consent of Seller.

• Seller will warranty all new Equipment to be free from defects in material and workmanship for a period of ONE (1) YEAR after the date of delivery and warrants that for one year from date of service, Services will be performed in a workmanlike manner.
• b. This warranty coverage applies only to a Buyer purchasing directly from Seller and is non-transferable.
• Any defective part will be repaired or replaced at the Seller’s discretion, at no charge, providing the Buyer returns the defective unit to the Seller during the applicable warranty period (pre-paid) along with a factory issued Return Authorization Number and brief description of the problem.
• This warranty does not apply to ancillary mounted/assembled equipment. This warranty will not apply to Equipment that: (i) is damaged due to misuse, abuse, negligence or accident occurring during or after shipment; (ii) is changed or modified (unless the change or modification is made by or in accordance with written instructions of Seller); (iii) deteriorates due to erosion, abrasions or chemical action; (iv) fails due to improper installation (except for installation provided or supervised by Seller), operation or maintenance; (v) fails due to any non-Seller equipment, or system with which Equipment is used; or (vi) Buyer operates in any manner other than in accordance with Seller’s manual, guidelines, operating instructions or other material.
• All costs of removing and re-installing the Equipment is the Buyer’s responsibility. Seller will not pay for shipping charges incurred in sending the defective product from the Buyer to the Seller, but will pay for standard ground return shipment.
• The repair or replacement of Equipment is the Buyer’s sole and exclusive remedy for defective Equipment. By its acceptance of the Equipment, Buyer hereby, specifically and expressly, waives all other liability or obligation of any kind or character of Seller, including without limitation liability predicated upon strict liability or tort, and all damages and losses as a result thereof, including but not limited to all known, unknown, foreseeable, unforeseeable, absolute, contingent, liquidated, non-liquidated, compensatory, general, special, consequential, incidental, or punitive damages, and with respect to the Equipment, its return, repair, restoration and replacement. With respect to such waiver, Buyer hereby waives all statutory, common law rights, defenses and limitations which would seek to limit application of the above general release.
• The foregoing warranties are exclusive and in lieu of, and seller disclaims and buyer waives, all other warranties of merchantability, fitness for a particular purpose and of any other type, whether express or implied, arising by law (statutory or otherwise) and whether or not occasioned by seller’s negligence.

Seller will not be liable to buyer, for special, punitive, indirect or consequential damages of any kind, including, but not limited to, lost profits, downtime, loss of business and from any claim, action or cause whatsoever arising out of or in any way connected with the manufacture, sale, handling, repair, replacement or use of products.
In no event will seller’s aggregate liability arising out of or related to this agreement, whether in contract or tort or any other theory of liability, exceed the purchase price of the products giving rise to the claim, even if seller is advised or placed on notice of the possibility of such penalties or damages and notwithstanding the failure of agreed or other remedy of its essential purpose.
In no event shall Seller be liable for late delivery or other penalties.

All drawings, designs, know-how, inventions, devices, works of authorship, technology, Seller’s confidential information, improvements thereto, and all associated patent, patent applications, copyright, including applications and registrations, trade secret, or other similar proprietary or intellectual property rights (collectively, “Seller IP”) in or related to the conception, creation, development, reduction to practice, design, production, delivery, operation, use, application or performance of Equipment or Services, are and will remain the sole and exclusive property of Seller.
In no event may Buyer make or apply for a patent, copyright, or other claim to the ownership or license of Seller’s Equipment or Services and/or Seller IP. Nothing in this Paragraph 5 precludes Buyer from incorporating a description or reference to Seller’s Equipment and/or non-confidential aspects of Seller’s technology or processes where necessary to support a patent, copyright, or other claim to Buyer’s product, provided, however, that no use of Seller’s name, trademarks or logos may be made without Seller’s prior written consent. Nothing in the Agreement will be construed as granting to Buyer any license, ownership, or grant of intellectual property rights with regards to the Equipment or Services or Seller IP. To the extent Buyer creates, conceives, develops, or reduces to practice any improvements in relation to Seller IP, Buyer hereby irrevocably assigns all right, title, and interest in and to such improvements and related intellectual property rights to Seller. Seller’s sale of Equipment to or performance of Services for Buyer does not include any research, development, design, or other services associated with Seller’s IP.
Buyer shall not, and Buyer shall take reasonable measures to ensure that its customers do not, attempt to duplicate or reverse-engineer the Equipment or in any other manner attempt to misuse or misappropriate any Seller IP.

Seller shall defend, indemnify and hold harmless Buyer against third party claims for personal injury or tangible property damage to the extent caused by a defect in any Equipment. Seller’s obligations to Buyer hereunder shall be subject to and conditioned upon Buyer giving Seller written notice of such claim (including all known material facts related thereto) within ten (10) days after it is asserted against Buyer (provided that the failure to give Seller written notice of a claim as provided herein shall relieve Seller from its obligations hereunder only if and to the extent Seller is prejudiced thereby) and Buyer granting Seller exclusive direction and control of the investigation, defense and settlement of such claim, including, but not limited to, selection of legal counsel to represent Buyer at Seller’s expense.

Seller reserves the right, in its sole discretion and without prior notice, to make changes to Equipment at any time that do not materially affect form, fit or function.

• Buyer requested order change or cancellations, may incur a fee of up to 10% of the total value of the order.
• Buyer may request changes to an order up to 5 days after confirmation.
• No delivery reschedules or delays will be permitted within 60 days of the confirmed ship and/or FAT date per Seller’s order confirmation.
• No cancellation of Equipment is permitted within forty-five (45) days of scheduled FAT and/or Shipment per Seller’s Order Confirmation. In the event Buyer cancels any order for Equipment outside of that time frame or does not accept delivery, the minimum charge imposed by Seller and payable immediately will be: the price of the manufactured Equipment, plus the cost of labor, any work in progress, any parts and components that are on order, and any manufacturer cancellation charges for unshipped items for such cancelled parts and components.
• If shipment of the Equipment is delayed or rescheduled for greater than ten (10) days after the confirmed ship date due to Buyer’s fault, then upon the expiration of such ten (10) day period, Buyer shall pay to Seller, a storage and handling fee equal to one tenth of one percent (0.10%) per day of the purchase order value for each day the shipment is delayed, with a maximum storage and handling fee of ten percent (10.0%) of the purchase order value. The parties agree that such amounts are a reasonable pre-estimate of the damages Seller will suffer as a result of delay based on circumstances existing at the time the purchase order was issued and are to be assessed as liquidated damages and not as a penalty.
• If pursuant to the terms of the purchase order, Buyer has elected to use a freight forwarder and/or carrier selected by Buyer, and shipment of the Equipment does not take place on or prior to the confirmed ship date as a result of Buyer’s failure to arrange for Buyer’s freight forwarder and/or carrier to take delivery of the Equipment on the confirmed ship date, then, upon five (5) business days’ notice to Buyer (which may be by email), (i) Seller shall be entitled to ship the Equipment to Buyer using a freight forwarder selected by Seller CPT freight prepaid and billed” and invoice Buyer for such charges; and (ii) Buyer shall pay to Seller such invoiced charges net thirty (30) days after date of invoice. If Seller exercises its rights under this paragraph, title and risk of loss shall pass to Buyer in accordance with the Incoterm as specified in the Quote.
• Rush order requests, including special shipping methods, must be explicitly noted at time of order submission.
• Return requests must include, part number, serial number, and all associated purchase documentation.
• Potential returns must be approved and a Return Goods Authorization must be issued by Seller.
• Return, acceptance, and credit are subject to inspection of product by Seller.
• Returns are subject to a restocking fee of 30% of invoice value when Seller is Banjo Corporation and 20% of invoice value when Seller is KZValve LLC.

For purposes of this Agreement, “Confidential Information” shall include all information furnished under this Agreement which is designated as confidential or proprietary, or which the receiving party knows or should know is being disclosed on a confidential basis, including without limitation pricing information, proposals, prints, drawings and all information in or related to the design, development, production, delivery, operation, use, application or performance of any of a party’s technology, equipment, parts, or maintenance/services. Confidential Information does not include information which: (a) is known or independently developed by the receiving party prior to its disclosure by the other party, as evidenced by receiving party's records; (b) becomes a part of the public domain without breach of this Agreement by the receiving party; (c) is received from a third party without restriction and under conditions permitting its disclosure to others; or (d) which is disclosed pursuant to judicial action or government regulations provided the receiving party notifies the disclosing party prior to such disclosure, and cooperates with the disclosing party in the event it elects to legally contest and avoid such disclosure.
For a period of five (5) years from the date of receipt, Confidential Information shall be maintained in confidence by the receiving party, shall not be disclosed to any third party, other than Seller’s suppliers who have a reason to know, without prior written approval of the disclosing party, and shall be protected with the same degree of care as the receiving party normally uses in the protection of its own confidential and proprietary information, but in no case with any less degree than reasonable care. Notwithstanding the foregoing, the Parties’ obligation to protect trade secrets is perpetual or for so long as such information remains a trade secret under applicable law, whichever occurs first.

Seller is not liable for any failure to perform its obligations under this Agreement resulting directly or indirectly from or contributed to by, acts of God, acts of civil or military authorities, riots or civil disobedience, terrorism, wars, strikes or labor disputes, accidents, floods, fires, or inability to secure material or transportation facilities, dissolution of a supplier’s business, acts or omissions of carriers, or any other circumstance beyond Seller’s reasonable control; provided, however, that, Buyer agrees to take delivery and make payment for finished Equipment or component as of the date of the Force Majeure event.

No failure or delay by either party to insist upon strict performance of any rights or powers under this Agreement shall operate as a waiver thereof, nor shall any other single or partial exercise of such right or power preclude any other further exercise of any rights or remedies provided by law, unless agreed to by that party in writing. Any waiver of this Agreement shall not operate or be construed as a waiver of any subsequent breach by either party.

This Agreement may not be transferred or assigned by Buyer without the prior written consent of Seller. Seller may assign its rights and obligations under this Agreement in whole or in part to an affiliate company or third party acquirer in the event of a merger, acquisition or sale of all or substantially all its assets.

Buyer agrees that monetary damages may not be sufficient to remedy a breach hereunder and that Seller shall be entitled to seek specific performance and injunctive or other equitable relief.

If any provision of this Agreement is held by a court of competent jurisdiction to be contrary to law, the provision shall be modified by the court and interpreted so as best to accomplish the objectives of the original provision to the fullest extent permitted by law, and the remaining provisions of this contract shall remain in effect.

• Buyer shall be solely responsible for obtaining all approvals, authorizations licenses and permits, unless otherwise specified under the applicable Incoterms agreed to by the parties. Buyer shall comply with all laws, rules and regulations, and making all arrangements related to the export or import of Equipment supplied by Seller. Equipment and related technical information, data, documents and materials are subject to export controls under U.S. Export Administration Regulations and U.S. Department of the Treasury embargo regulations and other applicable laws. Buyer shall strictly comply with all such export controls, shall fully cooperate with Seller in any official or unofficial investigation, audit or inspection that relates to any of such controls, and shall not export, re-export, divert or transfer, directly or indirectly, any Equipment or related technical information, data, documents or materials to any party or destination or for any use that is subject to an embargo or otherwise prohibited pursuant to such controls, unless and until Buyer obtains all required governmental and regulatory approvals, authorizations, licenses and permits.
• International Will-Call orders must be picked up within 72 hours of Seller’s pick-up-ready confirmation. Shipping for delinquent orders will be arranged by the Seller at the Buyer’s expense.

This Agreement shall be governed by and construed in accordance with the laws of the domicile of Seller, without regard to its conflict of law provisions. This Agreement shall not be governed by the U.N. Convention on the International Sale of Goods.

A Quote is a preliminary price estimate/offer only, not a Sales Order, Acknowledgement, Invoice, or legally binding contract and may be withdrawn by the Seller at any time. In the absence of a Quote, pricing is set per Seller’s current published price list at the time of sale. Quoted prices exclude taxes, freight and insurance and any duties and brokerage charges, all of which shall be the sole liability and responsibility of Buyer. If Buyer claims an exemption from any tax, a valid and proper tax exemption certificate must accompany order. Unless otherwise set forth in Seller’s invoice, proposal, lease, or purchase order acknowledgment, all payments shall be made in the currency specified in the Quote.
Any deposit or graduated payment schedule shall be set forth in the Quote and invoiced accordingly. If not addressed in the Quote, Equipment will be invoiced upon shipment and Services upon completion or thirty (30) days from shipment of Equipment, whichever occurs first. Payment is due Net30 or as otherwise specified in the Quote.
All amounts not paid and received in full by the due date are subject to a finance charge at the rate of one and one half percent (1.5%) per month (eighteen percent (18%) per annum) or, if less, at the maximum rate permitted by law, from the date due until paid in full. Prices set forth in a Quote are subject to being adjusted due to extraordinary market conditions. As used herein, “extraordinary market conditions” means any increase in the cost of materials caused by changes in the market or for any other reason that is outside of Seller's control such as tariffs, surcharges, and fluctuations in currency and raw materials, which results in an overall price increase of the Equipment in excess of two percent (2%) above the price listed in the Quote or Order Acknowledgment. Changes in price will be applied from the date on which customs duties or other “extraordinary market conditions” are entered into force or are passed on to Seller. Amounts may fluctuate in response to changing tariff structures or trade policies. Buyer agrees to promptly pay any such increase as set forth in an invoice.
Each shipment is a separate sale and is subject to credit arrangements or to receipt of cash. If payment is not made in accordance with Seller’s payment terms, or if at any time, in Seller's sole judgment, Buyer's credit standing has been impaired, Seller may withhold shipment of any Equipment or the provision of any Services, until cash or credit arrangements have been established to Seller’s sole satisfaction.